Continuing on from my previous post where I laser cut a helical antenna for basic radio astronomy, I wanted a way to mount this. Whilst most people that are into these hobbies seem to have a mast that they can dump another antenna on, I didn’t. Also, I rent so adding a mast wasn’t really a great idea. Also, I’m impatient and have been known to be a bit lazy. Finally, because I am not receiving terrestrial signals, the antenna does not need a clear view of the horizon, just a clear view of the sky. An idea was thus born.
My logic was along the lines of “take antenna, put on post, attach giant paperweight”. Nice and simple, as long as I could lift said paperweight – it would be portable and easy to work with. Questions then included, what sort of post and what sort of paperweight? The post I wanted to be galvanised so it could handle a considerable time in the outdoors, and the paperweight I wanted to be easy and cheap – hence, premix concrete!
A quick visit to Fyshwick (the home of all things
useful industrial in the Canberra region) and I returned with:
- ~800mm long, 2″ square, galvanised fence post ($4, an offcut – check out MetalMart)
- a 2″ end cap to make it look swish ($2.50, MetalMart)
- a collection of M8 galvanised bolts for reinforcing (about $4, Bunnings)
- a 79c plastic bucket ($0.79, Bunnings)
- and a bag of premix concrete ($5.50, Bunnings)
Not bad for less than $20.
The plan was to fill the bucket with concrete, put the post in after mounting the bolts for reinforcing, let the concrete go off and finally have a portable antenna mount! My calculations based on typical concrete densities were in the ballpark of 24kg for a 10L bucket, so I bought 2 bags just in case. The final product weighs in at about 22kg including the post – pretty good in my opinion, given how much concrete densities vary.
Anyway, I’m happy with the results – I now need to mount the antenna and start looking for a signal!
Finally, a photo of the finished product: